March 2017 – Precision Concrete Cutting and Coring

March 14, 2017 By admin-prec Project Spotlight Technical Demolition 0 Comments

Project Spotlight Technical Demolition

Project Location: Atchison, Kansas
Project Type: Commercial
Project Task: Track-mounted wall sawing, technical demolition, debris handling and removal.
Project Date: October, 2016

Project Details: On this project at Benedictine College we were brought in to remove several wing walls to make way for extensive renovations. While safety and productivity were critical issues it was also a high priority to make precise cuts and remove the concrete without causing any collateral damage.

We used remote control track mounted wall saws to do all of the cutting as this satisfied the needs of our customer. For the technical demolition we used our BROKK 100 remote control demolition robot. Using our in-house fabrication shop we built a custom platform that allowed us to mount the BROKK 100 and then safely lift it into position using a telehandler.

On different occasions we observed the students gathering outside to watch the demo robot in action as they were fascinated to see this technology being used at their campus.

Our tasks on this project included the following:

Track mounted wall sawing
Technical demolition
Debris handling
Debris removal

As demonstrated in the video and photos below you can see that our team did a spectacular job on this project. In just a few days, everything was accomplished safely and professionally. We pride ourselves in offering intelligent and affordable solutions for our valued General Conctractors and we always strive to deliver all tasks on-time and on-budget. If you have any technical project that requires advanced technological solutions just give us a call at 913-681-9050 to discuss your needs. If you prefer send an email to mkt@wecutkc.com or submit a request form online by visiting https://wecutkc.com/services/request-a-quote/.

March 2, 2017 By admin-prec Project Spotlight Concrete Pour Back 0 Comments

Project Spotlight Concrete Pour Back

Project Location: North Kansas City, Missouri
Project Type: Commercial
Project Task: Concrete cutting, concrete removal, excavation, back fill & concrete pour back.
Project Date: October 17-19, 2016

Project Details: This project highlights our approach to expedited concrete pour back service. In this example, we were able to pour back 100's of feet of trench in about half a day. Commercial tenant finish projects benefit greatly from rapid work progression because the sooner the end user can open for business the better.

By coordinating closely with the General Contractor and Sub-Contractors we were able to schedule each phase of our scope of work for enhanced productivity and reduced cost. It's the team work that makes the dream work!

Our well trained technicians provided maximum safety and production to easily satisfy the demands of this job and everything was completed on budget and ahead of schedule. Our tasks on this project included the following:

Saw cut the concrete slab
Remove and haul the concrete slab
Excavation
Back fill
Concrete pour back

As shown in the video and photos below you can see that our crew did an excellent job on this project. We pride ourselves in offering intelligent and affordable solutions for our valued plumbing, mechanical and HVAC customers and we always strive to deliver all tasks on-time and on-budget. If you would benefit from a one phone call solution for GPR scanning, concrete cutting, concrete coring, concrete demo, concrete removal, back fill and concrete pour back just give us a call at 913-681-9050 to discuss your needs. If you prefer send an email to mkt@wecutkc.com or submit a request form online by visiting https://wecutkc.com/services/request-a-quote/.

March 2, 2017 By admin-prec Project Spotlight kc coring 0 Comments

Project Spotlight Concrete Coring

Project Location: Leawood, Kansas
Project Type: Commercial
Project Task: Concrete coring
Project Date: October 2016

Project Details: This Kansas City concrete coring project included more than 800 8 1/2" - 9" holes in a 7" suspended slab. Although most of the slab was not level all of the core holes had to be drilled perfectly vertical.

Our scope of work was closely coordinated with the HVAC contractor who was installing a high-tech heating and cooling system through the floor. We staffed the job according to the needs of our customer and everything was completed on time and on budget.

As depicted in the video and photos below you can see that our crew did an amazing job on this project. We pride ourselves in offering intelligent and affordable solutions for our valued plumbing, mechanical and HVAC customers and we always strive to deliver all tasks on time and on budget. If you find yourself in need of any type or size of KC coring just give us a call at 913-681-9050 to discuss your details. If you prefer send an email to mkt@wecutkc.com or submit a request form online by visiting https://wecutkc.com/services/request-a-quote/.